Package Content
Information
Blood resistance in gastro interstitial tract.
Extends from Physiolibrary.Icons.Microcirculation.
Parameters
Name | Description |
replaceable package Blood | |
Cond | [m3/(Pa.s)] |
onViscosity | |
onAnesthesia | |
onAngiogenesis | |
onAngiotensinII | |
onVasopressin | |
onCatecholamines | |
onOxygenOnly | |
onOxygenAndCarbonDioxide | |
onOxygenNeed | |
onExercise | |
VasculatureConductanceOnPO2[:, 3] | |
PO2OnConductance[:, 3] | |
Angiotensin2Effect[:, 3] | |
AlphaReceptorsEffect[:, 3] | |
VasopressinEffect[:, 3] | |
VasculatureHalfTime | [s] |
FunctionFailed | Function failed |
Connectors
Name | Description |
replaceable package Blood | |
tissueConnector | |
port_a | Blood inflow |
port_b | Blood outflow |
BloodFlow | [m3/s] |
busConnector | signals of organ bood flow resistence |
Ganglia | Sympathetic ganglia general neural activity [Hz] |
Information
Extends from Physiolibrary.Icons.Resistor.
Parameters
Name | Description |
replaceable package Blood | |
BaseConductance | [m3/(Pa.s)] |
Connectors
Name | Description |
replaceable package Blood | |
q_in | Blood inflow |
q_out | Blood outflow |
BloodFlow | |
busConnector | signals of organ bood flow resistence |
Information
Elastic blood flow compartment.
Extends from Physiolibrary.Icons.ElasticBalloon, Physiolibrary.Fluid.Interfaces.CompositionSetup (Initial substances composition setup).
Parameters
Name | Description |
replaceable package Medium | Medium model |
initialSystemisVeinsVol | [m3] |
Initialization of medium composition |
massFractions_start[:] | * Masses of all base molecules. If size is nS-1 then last value is 1-sum(others). If size is nS then all values are scaled to sum==1. [1] |
extraConcentration_start[Medium.nC] | Extra substance amounts per kilogram of solution |
Initialization |
temperature_start | Initial temperature [K] |
pressure_start | Initial pressure [Pa] |
Connectors
Name | Description |
replaceable package Medium | Medium model |
ExternalPressure | external pressure around the compartment [Pa] |
Compliance | elasticity of the stressed walls [m3/Pa] |
Pressure | blod pressure in compartment [Pa] |
Vol | blood volume in compartment [m3] |
busConnector | |
V0 | maximal zero pressure blood volume in compartment [m3] |
port_a[nPorts] | |
port_b | |
Information
Extends from Physiolibrary.Icons.CollapsingVessel, Physiolibrary.Fluid.Interfaces.OnePort (Hydraulical OnePort).
Parameters
Name | Description |
replaceable package Medium | Medium model |
PR1LL | start-collapsing sucking pressure, when external pressure is zero |
Advanced |
Performance |
EnthalpyNotUsed | |
Connectors
Name | Description |
q_in | Inflow |
q_out | Outflow |
ExternalPressure | |
Information
Elastic blood flow compartment.
Extends from Physiolibrary.Icons.BloodSequesteredCompartment.
Parameters
Name | Description |
replaceable package Blood | |
initialVol | initial compartment blood volume [m3] |
data[:, 3] | |
Connectors
Name | Description |
replaceable package Blood | |
referencePoint | |
ExternalPressure | external pressure around the compartment [Pa] |
Pressure | blod pressure in compartment [Pa] |
Vol | blood volume in compartment [m3] |
Information
Extends from Physiolibrary.Icons.BaseFactorIcon5.
Parameters
Name | Description |
enabled | disabled => y=yBase |
data[:, 3] | |
OnTau | [s] |
OffTau | [s] |
initialEffectValue | [1] |
stateName | |
Xscale | conversion scale to SI unit of x values [mol/s] |
Connectors
Name | Description |
yBase | |
y | |
O2Need | [mol/s] |
Information
Receptory sa adaptuju na priemerny tlak v arteriole - polcas adaptacie nastane za 2hod a 45min.
Zmena tlaku sa taktiez adaptuje - neviem preco? => potom to vizera, ze stimulacia receptorov je postupny proces (polcas nabudenia stimulacie je 20 sekund).
Zmena tlaku aktivuje receptory, ktorych stimulacia ma vplyv na vasokonstrikciu danej arterioly.
Extends from Physiolibrary.Icons.Resistor, Physiolibrary.Fluid.Interfaces.OnePort (Hydraulical OnePort).
Parameters
Name | Description |
replaceable package Medium | Medium model |
InitialPressureChange | [Pa] |
K_PressureChange | [Hz] |
Tau_PressureAdoption | [s] |
PressureChangeOnMyogenicCondEffect[:, 3] | |
Advanced |
Performance |
EnthalpyNotUsed | |
Connectors
Name | Description |
q_in | Inflow |
q_out | Outflow |
cond | [m3/(Pa.s)] |
Parameters
Name | Description |
Tau | [s] |
K | [Hz] |
initialPressure | [Pa] |
Connectors
Name | Description |
InterlobarPressure | [Pa] |
PressureChange_SteadyState | [Pa] |
Parameters
Name | Description |
replaceable package Blood | Blood medium model |
data[:, 3] | |
NEURALK | [1] |
HUMORALK | [1] |
Switch | |
Setting | [1] |
Connectors
Name | Description |
replaceable package Blood | Blood medium model |
yBase | |
y | |
port_a | |
GangliaGeneral | Sympathicus neural activity from general ganglia [Hz] |
Parameters
Name | Description |
replaceable package Blood | Blood medium model |
NEURALK | [1] |
HUMORALK | [1] |
Switch | |
Setting | [1] |
Conditional inputs |
useBase | If not then yBase=1 |
Connectors
Name | Description |
replaceable package Blood | Blood medium model |
GangliaGeneral | Sympathicus neural activity from general ganglia [Hz] |
yBase | |
y | |
port_a | |
Information
Extends from Icons.BaseFactorIcon4.
Parameters
Name | Description |
replaceable package Blood | |
Connectors
Name | Description |
yBase | |
y | |
replaceable package Blood | |
port | |
Automatically generated Wed Oct 11 14:54:26 2023.